MODERN METHODS OF HEAT TREATMENT TO NON FERROUS ALLOYS

Jirapure S. C; Wankhade A. M.

doi:10.17605/OSF.IO/NHG8Q

Authors

Jirapure S. C Research Scholar, Mechanical Engg. Dept., JD Institute of Engg. & Tech., Yavatmal (MS)
Wankhade A. M. Assistant Professor, Mechanical Engg. Dept., Sipna College of Engineering and Technology, Amravati (MS)

DOI:

https://doi.org/10.17605/OSF.IO/NHG8Q

Keywords:

hardening, heat treatment, properties, processes, grain structure, solid solution

Abstract

Non ferrous alloys are the most versatile engineering materials. The combination of physical properties such as strength, ductility, conductivity, corrosion resistance and machinability makes these suitable for a wide range of applications. These properties can be further enhanced with variations in composition and manufacturing processes. Present paper gives a clear idea about various strengthening processes of non ferrous alloys and prepares it as per the need of the user.

Downloads

Download data is not yet available.

References

Archard, J.F. (1953), “Contact and rubbing of flat surfaces”, Journal of Applied Physics, Vol.24, No.8, pp. 981-988.

Arther, (1991), “Heat treating of copper alloys”, Copper Development Association, ASM Hand Book, Vol. 4, pp. 2002-2007.

Barrett, C.S. (1952), “Structure of Metals”, Metallurgy and Metallurgical Engineering series, Second Edition,McGRAW-Hill book Co, INC.

“Copper & Copper Alloy Castings Properties & Applications” a handbook published by Copper Development Association, British Standards Institution, London W1A 2BS TN42 (1991).

“Copper – The Vital Metal” Copper Development Association, British Standards Institution, London W1A 2BS CDA Publication No. 121, (1998).

“Cost-Effective Manufacturing -Design for Production” a handbook published by Copper Development Association, British Standards Institution, London W1A 2BS CDA Publication No 97, (1993).

“Copper and copper alloys- compositions, applications and properties” a handbook published by Copper Development Association, British Standards Institution, London W1A 2BS publication No. 120 (2004).

“Copper-Nickel Welding and Fabrication”, Copper Development Association, British Standards Institution, London W1A 2BS CDA Publication No. 139, 2013, pp.01-29.

“Copper Nickel Sea water piping systems ”, Application datasheet by Copper Development Association, British Standards Institution, London W1A 2BS CDA Publication.

“Corrosion Resistance of Copper and Copper Alloys”, Copper Development Association, British Standards Institution, London W1A 2BS CDA Publication No. 106.

Donald R. Askeland et al. (2011), “Materials science and engineering”, Published by Cengage Learning, Third Indian Reprint, pp. 429.

“Equilibrium Diagrams Selected copper alloy diagrams illustrating the major types of phase transformation”, Copper

Development Association, British Standards Institution, London W1A 2BS CDA Publication No 94, (1992).Jay L. Devore. (2008), “Probability and statistics for engineers”, Cengage Learning.

John W. Cahn. (1966), “Hardening by spinodal decomposition”, Acta Metallurgica, Vol. 11, No. 12, pp. 1275-1282.

Kodgire V.D. and Kodgire, S.V. (2011), “Material Science and Metallurgy for Engineers”, 30th Edition, A Text book published by Everest Publishing house with ISBN 8186314008.

Ilangovan, S. and Sellamuthu, R. (2012), “An Investigation of the effect of Ni Content and Hardness on the Wear Behaviour of Sand Cast Cu-Ni-Sn Alloys”, International Journal of Microstructure and Materials Properties, Vol. 7, No.4. pp. 316-328.

Naeem, H.T. and Mohammed, K.S.(2013), “ Microstructural Evaluation and Mechanical Properties of an Al-Zn-Mg-Cu-Alloy after Addition of Nickel under RRA Conditions”, Materials Sciences and Applications, 4, pp.704-711.

Peters, D.T., Michels, H.T. and Powell, C.A. (1999), “Metallic coating for corrosion control of marine structures” published by Copper development Association Inc., pp.01-28.

Zhang, J.G., Shi, H.S. and Sun, D.S. (2003), “Research in spray forming technology and its applications in metallurgy”, Journal of Materials Processing Technology, Vol.138, No. 1-3, pp.357-360.